Hire of Diesel & Electric Air Compressors, Power Generators, Welding Machines, Guniting and Sand Blasting Hoppers, Dewatering Pumps, Pneumatic Rock Breakers, Drill Machines, Chippers and other Construction Equipment serving in all over India like Mumbai, Pune, Calcutta, Delhi, Bangalore, Hyderabad, Vizag and other Indian Cities.

Air Compressor Accessories

Pneumatic Chippers are special purpose tools, specially designed for chipping, caulking, sealing, scraping and stonework

125kvarb11


Guniting Hopper
refers to the dry-mix process, in which the dry cementitious mixture is blown through a hose to the nozzle, where water is injected immediately before application.. The concrete is blasted by pneumatic pressure from a gun, hence "gun"-ite.

Guniting means blowing dry material out of a hose with compressed air, wetting it as it was released. This was later used to patch weak parts in old buildings. Guniting Hopper or "cement gun" is the equipment used, and "gunite", the material that was produced.

The dry mix method involves placing the dry ingredients into a hopper and then conveying them pneumatically through a hose to the nozzle. The nozzleman controls the addition of water at the nozzle. The water and the dry mixture is not completely mixed, but is completed as the mixture hits the receiving surface. This requires a skilled nozzleman, especially in the case of thick or heavily reinforced sections. Advantages of the dry mix process are that the water content can be adjusted instantaneously by the nozzleman, allowing more effective placement in overhead and vertical applications without using accelerators. The dry mix process is useful in repair applications when it is necessary to stop frequently, as the dry material is easily discharged from the hose.

Reinforcement sprayed concrete is reinforced by conventional steel rods, steel mesh, and/or fibers. Fiber reinforcement (steel or synthetic) is also used for stabilization in applications such as slopes or tunneling.

GunHopper gunitin


Rock Breakers
are ideally suited as Demolition tools to deliver the power for demolition of foundation walls of concrete and bricks, cutting and breaking pavements, trenching, temping, pile driving, removing slag from ladder and furnaces and many other applications.

IndexTool IndexTool pneumatic-breaker-176127


Rock Drills (Jack Hammers)
are available as wet or dry machines and in the various range of tools suitable for general excavation, blast-hole drilling, shaft sinking, tunneling quarry work, road work, Construction and maintenance applications such as driving or setting machinery anchors and drilling holes in concrete, bricks or rock.

rb9


Sand Blasting / Shot Blasting Hopper
setup usually consists of three different parts: the abrasive itself, an air compressor, and the Sand Blasting Hopper. Sandblasting is primarily used for two somewhat different applications. The first of these is to clean a surface of anything that may be clinging to it. The second is to either etch or carve designs or words into glass or a similar material. Sandblasting as a cleaning method has been widely used for over a hundred years, often as a method of priming a surface for the application of paint or a sealant. When painting, one doesn't want to trap dust, dirt, or bubbles in a previous layer of paint, or other imperfections under the new layer. By launching small bits of abrasive at the surface at a high speed, all imperfections are knocked loose and can then be easily washed off, creating an incredibly smooth surface upon which to lay the new layer of paint. Sandblasting may also be used for such projects as cleaning the hulls of ships or large fabricated structures suchs as channels and beams In decorating glass, sandblasting is a wonderfully popular technique, with few substitutes. While hand-etching is possible, it is incredibly time consuming and expensive, and laser-etching has a range of flaws which make it a questionable choice. There are two main ways in which sandblasting is used to decorate glass: etching and carving. In glass etching, abrasive is blasted at the glass lightly to turn the glass semi-opaque. This 'whiting' or 'snowing' of the glass can be used to great effect to produce words or images. By adjusting the speed of the sandblasting and the angle from which the abrasive is being launched, differing shades can be created, allowing for some true works of art. Glass is carved by steadily sandblasting the surface through a stencil which protects the areas you don't want to be carved out. S

Hopperfds

 Maheshwari Hiring Services


Our Contact

Telephone
:+91-22-25203146,
+91-22-25203944
Fax : 2521 5228
mobile : +919819373337
mail : maheshwarihiringservices@yahoo.in

Jani Estate,Ghatla Road,,
Waman Tukaram Patil Marg,Near Duke's Co.,Opp.Shatabdi Hospital,Chembur,Mumbai-400 071, Maharashtra..

 Products

pone Diesel Screw Air Compressors

pfour
Diesel Air Compressors

psix
Welding-Generators

pthree
Diesel Power Generators

ptwo
GunHopper

pfive
RockBreakers

Bookmark and Share